Electronic engineer Jon D. Paul has rebuilt the quantizer (analog to
digital) of the legendary voice encryption machine SIGSALY.

One of the most impressing exhibits in the National Cryptologic Museum in Fort Meade near Washington is a mockup of SIGSALY. It is a maquette and has no electronics inside.

Source: Schmeh

SIGSALY

The SIGSALY is a voice encryption machine. It was used in World War II for the highest-level Allied communications. A SIGSALY consisted of several components and filled a whole room. As far as I know, the SIGSALY is the largest encryption machine ever built. Only 12 copies were produced. In total, SIGSALY supported about 3,000 encrypted telephone calls. Among the users were Winston Chuchill and Franklin D. Roosevelt.

Source: NSA, used with permission

The SIGSALY converted an analog sound signal to a digital one (this was done with the help of an element named quantizer) and encrypted it with a One Time Pad. The key (i.e., a random number as long as the sound signal to be encrypted) was provided on a record, which was destroyed after use. One of the challenges in the SIGSALY design was to synchronize the records of the two machines involved in an encrypted call.

Source: Schmeh

The following picture shows a SIGSALY model on display at the National Cryptologic Museum.

Source: Schmeh

Jon Paul’s quantizer rebuild

Jon Paul, an Electronic Engineer and inventor living in France, has spent 20 years researching SIGSALY and the history of digital technology. He searched IEEE and and NSA journals as well as old patents. Donald Mehl, a WW2 SIGSALY technician gave him important assistance. As the SIGSALY was top secret, even today detailed information about it is hard to get.

In 2015, Jon thought it possible to rebuild a SIGSALY quantizer. Rebuild projects have a long tradition in crypto history. Especially, codebreaking devices like Colossus, the Bombe, the Cyclometer, and the Bomba have been recreated. There is also a rebuild of Alan Turing’s voice encryption machine DELILAH. So, Jon tried his luck on rebuilding a SIGSALY quantizer.

In reconstructing the SIGSALY quantizer, Jon wanted to make something that could be used in practical demonstrations and as a museum piece. The design includes a 120/240-volt power supply, a microphone preamp, a ramp generator, a panel meter displaying the analog-to-digital conversion, and five neon lamps that light up in logarithmic sequence.

© Jon D. Paul 2018, used with permission

© Jon D. Paul 2018, used with permission

Some of the parts Jon needed were already available in his laboratory, while he purchased others on eBay. Design and construction extended over three years. The overall cost was about US $1,250. Here’s a YouTube video Jon made that explains the quantizer:

If you want to know more, read Jon’s article from 2018 in the IEEE Spectrum. There’s a supplement published in 2019. It goes without saying that I recommended Jon to hand in a presentation for HistoCrypt 2019. Perhaps, some of us will meet him there.


Further reading: The machine that broke the Enigma

Linkedin: https://www.linkedin.com/groups/13501820
Facebook: https://www.facebook.com/groups/763282653806483/

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Kommentare (7)

  1. #1 Jerry McCarthy
    England, Europa
    3. März 2019

    Abo.

  2. #2 Klaus Schmeh
    3. März 2019

    @Jerry: I forgot to put a link on the post about your cyclometer rebuild. I have now changed this.

  3. #3 Jerry McCarthy
    E
    3. März 2019

    Which is the “crypto museum” which is being referenced during the video? Not the Eindhoven one, I assume….

  4. #4 Richard SantaColoma
    https://proto57.wordpress.com/
    3. März 2019

    That is great! When I’ve seen this equipment in the museum, I’ve wondered this very thing… would it be possible to replicate, or rebuild it, so we could see the system in operation. And I dabble in antique radio and electronics myself, and it also interests me for this reason… so “hat’s off” to Jon! Quite an accomplishment.

    Are there plans to set up a live display of his work at the museum?

  5. #5 Jerry McCarthy
    England, Europa
    3. März 2019

    @Klaus #2. Vielen Dank! Meine Polnische Bomba kryptologiczna kommt auch bald….

  6. #6 Klaus Schmeh
    3. März 2019

    Tony Patti via Linkedin:
    THANKS for posting, this is ABSOLUTELY FASCINATING including all the many links! Quite an interesting peek into the analog world before computers…

  7. #7 Jon PAUL
    Paris
    4. März 2019

    Thanks for your interest and comments!

    Notes: The NSA model is a mockup and has no electronics. According to NSA and NCM, my quantizer is the first ever recreation of any part of SIGSALY.

    RE live display … museum

    In Autumn 2018, it received great interest at CSnet at CNAM and our organizations yearly conference at BNF both in Paris.

    For now, practical considerations limit demonstrations to a few minutes at conferences, rather than a continuously operating museum display.

    I hope to have it at a future RSA conference in San Francisco.

    Jon